高级检索

    马师白, 鲁军, 高晋生. 含氯有机废料资源化处理基础研究I. PVC固定床热解脱氯反应特性[J]. 华东理工大学学报(自然科学版), 2002, (1): 59-62.
    引用本文: 马师白, 鲁军, 高晋生. 含氯有机废料资源化处理基础研究I. PVC固定床热解脱氯反应特性[J]. 华东理工大学学报(自然科学版), 2002, (1): 59-62.
    Treatment and Recovery as Resources of Chlorine-containing Organic Waste I. Pyrolysis Dechlorination of PVC in a Fixed Bed Reactor[J]. Journal of East China University of Science and Technology, 2002, (1): 59-62.
    Citation: Treatment and Recovery as Resources of Chlorine-containing Organic Waste I. Pyrolysis Dechlorination of PVC in a Fixed Bed Reactor[J]. Journal of East China University of Science and Technology, 2002, (1): 59-62.

    含氯有机废料资源化处理基础研究I. PVC固定床热解脱氯反应特性

    Treatment and Recovery as Resources of Chlorine-containing Organic Waste I. Pyrolysis Dechlorination of PVC in a Fixed Bed Reactor

    • 摘要: 在10g固定床反应器中对PVC在惰性气氛下的热解脱氯特性及有关工艺参数进行考察,并研究了热解终温(FPT)对PVC热解产物产率的影响。实验结果表明,在温度为300℃,反应时间为3h,升温速率为5℃/min条件下,PVC中大部分的氯可脱除,脱氯率可达90%,另有约10%的氯残留在液体产物及固态残渣中,且升温速率越慢,分解程度越大,反应的起始分解温度也越低。随着热解终温的提高,可燃气体率增大,焦油和残渣产率则减少。

       

    /

    返回文章
    返回