高级检索

    樊蓉蓉, 李涛, 朱炳辰, 朱继承. 异形多通孔催化剂工程研究II. 12孔及24孔α-Al2O3颗粒曲折因子测定[J]. 华东理工大学学报（自然科学版）, 2002, (1): 1-4.
    引用本文: 樊蓉蓉, 李涛, 朱炳辰, 朱继承. 异形多通孔催化剂工程研究II. 12孔及24孔α-Al2O3颗粒曲折因子测定[J]. 华东理工大学学报（自然科学版）, 2002, (1): 1-4.
    shu
    FAN Rong rong, LI Tao, ZHU Bing chen *, ZHU Ji cheng. Engineering Research of Irregular Shape Catalysts with Through-holes II. Determination of the Tortuosity Factor of Pellets with 12 and 24 Through-holes[J]. Journal of East China University of Science and Technology, 2002, (1): 1-4.
    Citation: FAN Rong rong, LI Tao, ZHU Bing chen *, ZHU Ji cheng. Engineering Research of Irregular Shape Catalysts with Through-holes II. Determination of the Tortuosity Factor of Pellets with 12 and 24 Through-holes[J]. Journal of East China University of Science and Technology, 2002, (1): 1-4.
    shu

    异形多通孔催化剂工程研究II. 12孔及24孔α-Al2O3颗粒曲折因子测定

    Engineering Research of Irregular Shape Catalysts with Through-holes II. Determination of the Tortuosity Factor of Pellets with 12 and 24 Through-holes

      摘要
    • 摘要: 采用色谱法，在单颗粒线反应器中对两种异形多通孔催化剂的曲折因子进行了测定。通过计算机数据采集、处理系统处理实验数据，得到两种催化剂的曲折因子分别为：12孔环柱形颗粒δ=2.55，24孔环柱形颗粒δ=2.43。

       

      Abstract: The tortuosity factor of two irregular shape pellets were measured using dynamic state method-single pellet string reactor method (SPSRM). The experimental data was analyzed by online computer system and the parameter estimation method was applied to get the tortuosity factor. The tortuosity factor of pellet with 12 through holes is 2.55 and that of pellet with 24 through holes is 2.43.

       

      • HTML全文
      • 参考文献(0)
      • 相关文章
      • 施引文献
    • 资源附件(0)

    /

    返回文章
    返回