高级检索

    张刚, 陆柱. 热处理对化学镀Ni-Mo-P合金耐蚀性能的影响及其机理[J]. 华东理工大学学报(自然科学版), 1994, (3): 373-377.
    引用本文: 张刚, 陆柱. 热处理对化学镀Ni-Mo-P合金耐蚀性能的影响及其机理[J]. 华东理工大学学报(自然科学版), 1994, (3): 373-377.
    Effect of Heat Treatment on Corrosion Performance of Electroless Ni-Mo-P Deposit Alloy and Studies of Its Anti-Corrosive Mechanism[J]. Journal of East China University of Science and Technology, 1994, (3): 373-377.
    Citation: Effect of Heat Treatment on Corrosion Performance of Electroless Ni-Mo-P Deposit Alloy and Studies of Its Anti-Corrosive Mechanism[J]. Journal of East China University of Science and Technology, 1994, (3): 373-377.

    热处理对化学镀Ni-Mo-P合金耐蚀性能的影响及其机理

    Effect of Heat Treatment on Corrosion Performance of Electroless Ni-Mo-P Deposit Alloy and Studies of Its Anti-Corrosive Mechanism

    • 摘要: 对于经200~700℃热处理的化学镀Ni-Mo-P的合金镀层,测试了其在5%NaCi溶液中的腐蚀性能。结果表明,随温度的提高,合金的自腐蚀电位均正向移动。腐蚀速度随温度的提高,呈现先升后降的变化趋势。经200~600℃热处理,都将使合金的耐蚀性有不同程度的下降。合金结构中晶格和相的变化,保护性氧化膜的生成,以及合金与基体间Fe-Ni-Mo-P扩散层的形成等,分别对合金耐蚀性能变化起了重要作用。

       

    /

    返回文章
    返回