高级检索

    阎庆华, 安琦. 三油楔固定瓦滑动轴承启动过程的性能[J]. 华东理工大学学报(自然科学版), 2007, (4): 569-572.
    引用本文: 阎庆华, 安琦. 三油楔固定瓦滑动轴承启动过程的性能[J]. 华东理工大学学报(自然科学版), 2007, (4): 569-572.
    YAN Qing-hua, AN Qi. Characteristics of Three-Fixing-Lobe Journal Bearing during Start-up Process[J]. Journal of East China University of Science and Technology, 2007, (4): 569-572.
    Citation: YAN Qing-hua, AN Qi. Characteristics of Three-Fixing-Lobe Journal Bearing during Start-up Process[J]. Journal of East China University of Science and Technology, 2007, (4): 569-572.

    三油楔固定瓦滑动轴承启动过程的性能

    Characteristics of Three-Fixing-Lobe Journal Bearing during Start-up Process

    • 摘要: 以三油楔固定瓦滑动轴承为研究对象,采用有限差分法数值求解Reynolds方程,研究了轴承启动过程、轴颈中心的运动轨迹以及轴承的动特性和稳定性在该过程中的变化规律。根据启动过程角速度不断提高,轴承对应的量纲一承载力不断减小的特点,得出承载力和轴承宽径比对轴承轴颈轨迹、动特性和稳定性影响的一系列曲线。结果表明:在启动过程,随着转动角速度的提高,轴承稳定性降低;减小宽径比有利于轴承稳定性的提高。

       

      Abstract: Journal bearing with three fixing-lobes was taken as the research subject.The change regulars of motion track of journal center and the dynamic characteristics and stability of journal bearing with three fixing-lobes were studied during start-up process by solving the Reynolds equation with finite difference method.According to the fact that with the angular speed increasing the dimensionless load capacity decreases,a series of curves of the relation between the dimensionless load capacity and length-to-dia...

       

    /

    返回文章
    返回