高级检索

    韩杰, 陆仁杰, 金一泓, 戴干策. 间歇搅拌反应釜的液-液分散性质数据用于连续搅拌反应釜设计的探讨[J]. 华东理工大学学报（自然科学版）, 1987, (2).
    引用本文: 韩杰, 陆仁杰, 金一泓, 戴干策. 间歇搅拌反应釜的液-液分散性质数据用于连续搅拌反应釜设计的探讨[J]. 华东理工大学学报（自然科学版）, 1987, (2).
    shu
    Han Jie, Lu Renjie, Jin Yihong, Dai Gance UNILAB Research Center of Chemical Reaction Engineering. Investigation on possibility of using liquid-liquid dispersion data of BSTR* design CSTR[J]. Journal of East China University of Science and Technology, 1987, (2).
    Citation: Han Jie, Lu Renjie, Jin Yihong, Dai Gance UNILAB Research Center of Chemical Reaction Engineering. Investigation on possibility of using liquid-liquid dispersion data of BSTR* design CSTR[J]. Journal of East China University of Science and Technology, 1987, (2).
    shu

    间歇搅拌反应釜的液-液分散性质数据用于连续搅拌反应釜设计的探讨

    Investigation on possibility of using liquid-liquid dispersion data of BSTR* design CSTR

      摘要
    • 摘要: 本文结合聚碳酸酯液-液聚合反应釜的放大工作,探讨了将间歇搅拌釜的液-液分散性质数据用于设计连续搅拌釜的可能性。通过分析和实验表明:只要合理设计反应器的进出料口位置,使连续操作中釜内相比不发生变化,并等于设计的进料相比,则已知的间歇搅拌釜的分散性质同于连续操作条件下的性质,而可以直接用于连续搅拌反应釜的设计。

       

      Abstract: It is necessary and possible to use liquid-liquid dispersion data of BSTR to design CSTR. It has been shown analitically and experimentally in this paper that if inlet and outlet positions of reactor is reasonably designed, liquid-liquid dispersion data of BSTR will be the same as that of CSTR, and can be directly used to design CSTR. The results have been used in the process development of polycarbonate, and the design of CSTR for polymerization.

       

      • HTML全文
      • 参考文献(0)
      • 相关文章
      • 施引文献
    • 资源附件(0)

    /

    返回文章
    返回